Foxconn’s 2021 plan called for EV factories in the United States and Thailand to be built in 2022, with mass production targeted for 2023. Those dates were goals, not proof that both factories opened on schedule. The Ohio project used an existing auto plant and later produced electric tractors; the Thailand project began construction, but the available company milestones do not confirm that production started.
What Foxconn announced in 2021
On August 12, 2021, Foxconn was reported to be planning EV factories in the United States and Thailand in 2022, with mass production expected the following year. The U.S. plan centered on Lordstown, Ohio, while the Thai project was developed with energy company PTT. These were forward-looking targets, not a record of completed construction or production. TechCrunch’s contemporaneous report covered the proposed schedule.
Foxconn and PTT announced an integrated EV manufacturing plan in Thailand in August 2021. The announcement described a five-to-six-year investment plan and said the facility could be located in the Eastern Economic Corridor. Those details described intentions at the time, not verified completion of the investment or confirmation of the eventual site. Foxconn’s announcement with PTT set out the original proposal.
How the U.S. and Thailand projects differed
| Project | Starting point | Documented progress | What the cited sources do not establish |
|---|---|---|---|
| Ohio, United States | Acquisition of Lordstown Motors’ existing production facility. | The transaction closed in May 2022, and Foxconn later reported initial production of five Monarch electric tractors in 2023. | Ongoing EV production as the site’s current purpose; Foxconn’s 2025 results describe a cloud- and networking-products plan instead. |
| Thailand | A new integrated EV manufacturing project developed with PTT through Horizon Plus. | Foxconn later reported that construction began in 2022; Horizon Plus lists equipment installation in Q1 2025 and production in 2025 as milestones. | Whether production actually began; the milestone listing is not confirmation of a completed start. |
What happened at the Ohio site
Foxconn acquired Lordstown’s facility
Lordstown Motors said its asset-purchase transaction with Foxconn closed on May 11, 2022. The filing also records the formation of MIH EV Design LLC to develop and industrialize all-electric commercial vehicles. Foxconn’s 2022 Annual Handbook described the acquisition of Lordstown’s Ohio production base. Lordstown’s SEC filing documents the transaction and related venture.
#1 Best Overall
- 1:16 scale, skill level 3, paint & glue required
- 90+ parts
- Molded in white, clear, clear red, and some chrome-plated parts
- Molded in white, clear, clear red, and some chrome-plated parts
- Built size: 12inches long Ages 14+
Initial tractor production followed, not proof of mass-market EV output
In April 2023, Foxconn announced that the first five Monarch MK-V electric tractors had rolled off the Ohio production line. That is evidence of initial vehicle manufacturing at the facility. It does not establish mass production of Foxconn-branded passenger cars or achievement of the original 2023 mass-production target. Foxconn’s announcement identifies the five tractors.
Foxconn later described a different use for the site
Foxconn’s 2025 Q2 results page describes an Ohio asset disposal and a plan to revitalize the site to manufacture cloud and networking products in response to U.S. demand for AI computing. That later statement points to a changed site strategy; it does not support describing the Ohio facility as currently focused on EV production. Foxconn’s 2025 Q2 results provide the company’s description.
Rank #2
- The electric jack for tesla is designed specifically for Tesla vehicles and perfectly matches most Tesla models (Model Y/3/S/X), saving you the trouble of modifying other jacks
- The tesla electric jack is made of high-strength alloy steel, sturdy and durable, with a maximum lifting weight of 3 tons (6614 lbs) and a lifting range of 5.2 inches to 12.6 inches
- The electric car jack kit for tesla is equipped with a full copper motor, which provides strong power, stable output, and enables one click lifting, making it convenient and effortless
- The tesla jack kit matches your car's 25mm holes perfectly to protect your car's battery without modification, and two compatible non-slip jack pads protect your car from steel beam scratches when lifting and lowering
- The car jack kit for tesla comes with a wrench, socket, gloves, storage bag, and more to help you quickly and easily replace tires in any emergency situation
What is known about the Thailand factory
Construction was reported to have started in 2022
Foxconn’s 2022 Annual Report, published in 2023, says its partner PTT in Thailand started construction of the EV factory in 2022. This is retrospective company reporting that construction began; it does not establish that the plant was completed or began production. Foxconn’s 2022 Annual Report records the construction start.
Horizon Plus describes a manufacturing-services project
The Thai venture is known as Horizon Plus. Its description covers EV design, production-system setup, supply-chain management, and assembly services. That makes the project broader than a simple Foxconn-branded car factory selling its own retail vehicles. The company’s current project page lists equipment installation in Q1 2025 and production in 2025. These are stated milestones; the page does not verify that either milestone was met or that production commenced. Horizon Plus’s About Us page gives its project description and schedule.
What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Rank #3
- V8 POWER: The model features a 400 cubic inch V8 engine, reflecting the muscle and power that defined the GTO's reputation.
- DETAILED SUSPENSION & EXHAUST: The kit incorporates separate rear suspension and exhaust detailing, adding to the realism of the model.
- BUCKET SEATS & CONSOLE: The model's interior features bucket seats and a floor shifter with a console, capturing the iconic look and feel of the GTO.
- OPTIONAL SUPERCHARGER: For those seeking more power, the kit offers an optional supercharger, allowing you to customize your model.
- CLEAR & COMPREHENSIVE INSTRUCTIONS: The included instructions are clear and user-friendly, making the kit accessible to modelers of different skill levels, from beginners to experienced hobbyists.
Did both factories open on the original schedule?
The evidence does not show two completed factories entering mass production in 2022 or 2023. In Ohio, Foxconn acquired an existing plant in 2022 and reported an initial run of five electric tractors in 2023, while its later account describes a move toward cloud and networking products at the site. In Thailand, construction began in 2022, but the available Horizon Plus milestone page does not confirm that production began in 2025. The original announcement should therefore be read as a plan with targets, not as proof that both sites delivered EV mass production on schedule.
Quick Recap
Rank #4
- Versatile 3-in-1 Kit: Build your 1963 Chevy Corvette Sting Ray as factory stock, a street custom, or a drag gasser with this multi-option kit.
- Enhanced Features: Includes pre-lettered drag slicks, clear red taillights, and stock & custom wheels for an authentic and detailed build.
- Multiple Engine Options: Customize your model with various engine intake options, allowing for unique and personalized creations.
- Retro Styling: Comes with a full-color, retro-styled decal sheet and vintage “Street Rods Series” packaging, perfect for nostalgic collectors.
- High-Quality Collectible: AMT's improved reissue offers superior parts and detailing, making it a must-have for model enthusiasts and collectors.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
