Free tools Windows power users keep installed
One-click scans. No signup required.
Hewlett Packard Enterprise (HPE) announced on July 1, 2021, that it would acquire data-protection software company Zerto for $374 million in cash. HPE said the purchase would strengthen its GreenLake cloud data services and advance its storage business toward cloud-native, software-defined services. The deal was completed in 2021, though HPE’s completion announcement and financial filing give different dates for the closing.
What HPE agreed to buy
Zerto made journal-based continuous data protection software. HPE described the software as supporting disaster recovery, backup and data mobility, and said Zerto served more than 9,000 customers through a network of more than 350 managed service providers at the time of the announcement. Those customer and provider counts were figures reported by HPE in 2021, not independently verified totals.
Why HPE said it wanted Zerto
HPE presented the acquisition as a strategic expansion of its cloud and storage services, rather than simply a purchase of a software vendor. It said Zerto would broaden GreenLake cloud data services and help move HPE Storage toward cloud-native, software-defined data services.
HPE CEO Antonio Neri framed the rationale around the challenge of protecting data across distributed environments: “With the explosive growth of data at the edge and across hybrid environments, organizations today face significant complexity in managing and protecting their data.” That statement reflects HPE’s explanation for the deal, not an independent assessment of its strategic value.
The Tool Desk
Outbyte PC Repair FREEClear out junk files and repair common Windows errorsFree Scan →Outbyte Driver Updater FREEScan for outdated or missing drivers - takes under a minuteDriver Scan →#1 Best Overall
- SATA DRIVES ONLY — 2.5in & 3.5in: Works with SATA I/II/III hard drives and SSDs. Does NOT support IDE/PATA, M.2 NVMe, M.2 SATA, SAS, or drives already in a USB enclosure. Check your drive's connector before ordering — a bare SATA drive has a wide flat L-shaped edge connector, not a ribbon cable or a small M.2 gold-finger card.
- USB TYPE-A HOST CABLE — NOT A USB-C PORT: The included host cable ends in USB Type-A and plugs into a USB 3.0 Type-A port. If your computer has only USB-C ports, you will need a USB-C to USB-A adapter, which is not included. For stable operation plug directly into the computer — USB hubs and USB 2.0 ports may cause intermittent disconnections.
- REAL-WORLD SPEED, NOT INTERFACE MATH: USB 3.0 with UASP support (UASP-capable host required). Typical mechanical HDD transfer speeds are 100-160 MB/s, which is the drive's own limit, not the port's; SSD speeds vary up to the USB interface maximum. Backward compatible with USB 2.0 and USB 1.1.
- 12V POWER ADAPTER INCLUDED — REQUIRED FOR 3.5in DRIVES: A 12V/2A AC power adapter is in the box and a wall outlet is needed. 3.5in HDDs cannot run on USB power alone — without the adapter the drive will fail to spin up or drop out during use. 2.5in drives are generally bus-powered, but the adapter is recommended for stability.
- PLUG AND PLAY, TOOL-FREE, HOT-SWAP: No drivers on Windows 10/11, macOS, or Linux. Lay-flat bay accepts a bare drive without tools, swaps without rebooting, and an LED shows power and activity. Note: S.M.A.R.T. diagnostics are not passed through the USB bridge, and on macOS a drive may need remounting after sleep. Drive not included.
What the $374 million figure means
The $374 million was the cash transaction value HPE announced on July 1, 2021. HPE said it planned to fund the purchase with cash on its balance sheet. Its completion announcement later described the net cash purchase price as $374 million.
HPE subsequently reported $416 million as the acquisition-date fair-value consideration in its FY2022 filing. It said that accounting measure primarily consisted of cash paid for Zerto’s outstanding common stock and vested in-the-money stock awards. The $416 million figure is a later accounting measure, not a replacement for or correction of the announced $374 million transaction value.
Rank #2
- Tool free design, easy to install,Transfer Rates Up to 480 Mbps when connected to a USB 2.0 port,Transfer Rates Up to 5 Gbps when connected to a USB 3.0 port.
- Suitable for 2.5” SATA/SSD;Supports Standard Notebook 2.5″ SATA and SATA II Hard drives
- Optimized for SSD, Supports UASP SATA III,Backwards-Compatible with USB 2.0 or 1.1
- Hot-swappable, plug and play, no drivers needed
- Operating System:Supported Operating Systems:Mac,Windows;Supported Windows Versions :Windows 7, Windows 8, Windows Vista, Windows XP; Supported Mac Versions: Mac OS X and Higher
When the acquisition closed
HPE announced that the acquisition was complete on September 1, 2021. Its FY2021 Form 10-K records the closing date as August 31, 2021. These refer to different milestones: the filing identifies the date the transaction closed, while the announcement date is when HPE publicly reported completion.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.What HPE forecast—and what the announcement does not establish
At announcement, HPE expected Zerto to contribute more than $130 million in run-rate revenue. That was HPE’s forecast in 2021; the announcement does not establish that the forecast was later achieved or quantify realized strategic benefits from the acquisition.
Quick Recap
Best Value
- SATA-Only Compatibility: Fits 2.5" and 3.5" SATA HDDs and SSDs. NOT compatible with SAS, M.2 NVMe, M.2 SATA, NVMe PCIe, or IDE/PATA drives. Note: some 4TB+ 3.5" drives with non-standard PCB height may not seat correctly — verify your drive's physical dimensions before purchasing.
- Tool-Free Setup: Slide, click, and go—no tools or screws needed. Swap drives in seconds without hassle.
- USB 3.0 (USB-A) with UASP: USB Type-A host connection — a USB-C to USB-A adapter is required if your computer only has USB-C ports (not included). Transfer speeds up to 625 MB/s theoretical maximum; typical real-world speeds are 100–180 MB/s for HDDs and up to 400–500 MB/s for SSDs.
- External Power Required: Includes 12V/2A AC power adapter — a wall outlet is needed (not bus-powered via USB). Aluminum shell with internal ABS shock-absorbing tray for durability and heat dissipation.
- Plug & Play — Windows 10/11, macOS & Linux: No drivers needed. LED indicates power and activity status. Note: S.M.A.R.T. diagnostics are not accessible through the USB bridge. Hard drive not included.
Rank #4
- 5 Gbps High-speed Transfer: CLAVOOP 3.5 hard drive enclosure supports UASP protocol for faster data transfer over USB 3.0, with tested read speeds up to 336 MB/s. Actual performance may vary depending on your device's capabilities
- Latest Design: Lay-Flat dock station 3.5 external hdd enclosure made from sturdy ABS material with a unique circular top, large ventilation holes, and four non-slip pads to ensure stable and cool operation
- Humanized Design: 3.5 hdd enclosure case built-in shock-proof sponges protect your drive; LED indicators show the 3.5 external hard drive enclosure working status; Auto-sleep function helps save energy—wake the drive with the power button; Plug and play, no tools or drivers required
- Wide Compatibility: HDD Enclosure 3.5 works with 3.5"/2.5" SATA I/II/III HDDs and SSDs up to 20TB to a PC, laptop, and other devices. Compatible with Windows 9/8/SE/ME/2000/XP, Mac OS 8.6 or latest version, Linux, ChromeOS, and gaming consoles like PS5, PS4, Xbox One, and more. (Note: Not compatible with IDE, mSATA, M.2 drives; System compatible hard disk format details see figure)
- Packing List: USB 3.0 to 3.5 sata hard drive enclosure x1 (include 12V/2A DC power adapter x1, USB 3.0 data cable x1, User manual x1); Please confirm your hard drive type before purchasing
Rank #3
- Feature - BENFEI Type-C/Type-A 2.5 inch Hard Drive Enclosure easily hook up your 2.5 inch SATA I/II/III hard drive to transfer files from one PC to another PC, laptop, PS4 or as a USB external hard drive.
- Speed - Up to 5 Gbps data transfer rate with supports UASP SATA III transmission protocol, which is 70% faster than traditional USB3.0. Backward compatible with USB 2.0 or 1.1 ports.
- Design - With USB Type-C/Type-A plug design, provide a easy connection option to laptop/phone/pad. Tool free installation, Plug & Play, No driver needed for this SATA enclosure. Just push out the cover, plug in the drive, close the cover and go. Hot-Swappable.
- Compatibility - BENFEI Hard Drive Enclosure supports Windows, LINUX, MacOS 8.0, and above. Specifically designed for 7/9.5mm thick, 2.5 inches, 6TB HDD & SSD. Compatible with Western Digital, Seagate, Toshiba, Samsung, Kingston, Crucial, Hitachi, and more.
- Warranty - Exclusive BENFEI Unconditional 18-month Warranty ensures long-time protection of your purchase; Friendly and easy-to-reach customer service to solve your problems timely.
- Agreement and announced $374 million cash transaction value: HPE, July 1, 2021.
- Completion publicly announced: September 1, 2021; closing date in HPE’s FY2021 filing: August 31, 2021.
- Later acquisition-date fair-value consideration: $416 million, reported by HPE in its FY2022 filing.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
