The New York State Public Service Commission (PSC) approved three-year electric and gas rate plans for Con Edison on January 22, 2026. The approved increases apply to utility revenues—not uniformly to every customer’s bill. What you pay depends on service type, usage, supply charges, customer class and applicable adjustments.
What did the PSC approve?
The plans cover electric Case 25-E-0072 and gas Case 25-G-0073. Con Edison filed them on January 31, 2025. Parties negotiated a joint proposal beginning June 26, 2025; it was issued for public comment on November 6, 2025, and adopted by the PSC on January 22, 2026. The New York State Department of Public Service (DPS) case summaries report the following annual utility-revenue changes:
| Service | Rate year 1 | Rate year 2 | Rate year 3 | Annual delivery-revenue increase | Annual total-revenue increase |
|---|---|---|---|---|---|
| Electric | $234 million | $409.7 million | $421.1 million | 4.4%, 4.4%, 4.3% | 2.8% each year |
| Gas | $27.5 million | $68.8 million | $70.3 million | 2.8% each year | 2.0% each year |
These are changes to Con Edison’s revenues, not a percentage increase to apply directly to an individual bill. See the DPS electric and gas case summaries for the approved figures and customer examples.
How much could a Con Edison bill increase?
The official summaries give sample changes for selected customer types and usage levels. For a residential gas customer using 100 therms per month, the DPS summary reports an approved rate-year-1 delivery increase of $5.73 (3.1%) and total-bill increase of $5.73 (2.4%). For its 2,549-therm residential example, the reported first-year delivery increase is $7.95 (0.2%). These are particular examples, not estimates for every household; consult the summary table for its rate-year-2 and rate-year-3 figures.
#1 Best Overall
- Various Monitoring Parameters: The power meter plug can monitor the power (W), energy (kWh), volts, amps, hertz, power factor, cost, minimum and maximum power (W), cumulative days and time of your appliances. By switching 7 display modes, you can easily know the various parameters while the appliance is working. The home energy monitor can also calculate and display how much power your appliance uses and how much electricity bill it cost in cumulative time
- Upgraded LCD Display: With large screen size 2.36 inch x 1.85 inch, clearer monitor backlit, our electrical usage monitor can display the data clearer and more visible no matter day or night. 180°full wide viewing angles is great for reading and recording the data in any angles. No need to stand on the front of the display and bend over to read the numbers
- Adjustable Backlight Time: Our upgraded watt meter has 5 options of backlight time. The default backlight time duration is 10 minutes(bL-0). If you want to change the backlight time, you can press and hold "UP" and "DOWN" button at the same time to enter backlight time setting, then press "UP" and "DOWN" to select the backlight time (bL-0 =10 minutes, bL-1=1 hour, bL-2=4 hours, bL-3=8 hours, bL-4=always on), finally press the "COST" to save the backlight time settings
- Overload protection: When the power of the appliance exceeds the overload power, the LCD will display “OVERLOAD” to warn the user. All the buttons will quit working and can only be workable when you lower or remove the load power. The default overload power is 3680W and is adjustable from 0 to 3680W. In general, you need to set the overload power to 1800W before using. Just press the "function" button for more than 3 seconds to enter the setting
- Data Memory Function: The wattage meter will record your power consumption data when you remove it from socket, or remove appliances from the electricity monitor. You can directly see the last data when you use it next time. This function can also automatically save the data when there is a sudden power failure
The electric summary provides sample residential figures at 280, 425 and 600 kWh per month, along with commercial and industrial examples. At 280 kWh monthly, its approved first-year delivery increase is $4.00; the summary’s table gives the corresponding total-bill and later-year figures. Use the listed usage, customer class and rate year when comparing those examples. The official electric and gas summaries distinguish delivery changes from total-bill changes.
Your total can also move because of energy use, supply charges and surcharges. A utility-revenue percentage is not a personalized forecast, and the sample bills in the filings are not universal predictions.
Rank #2
- Multi-function power monitor: Our electric usage monitor can monitor the power (W), electricity(kWh), voltage(V), frequency(Hz), current(A), power factor(PF), unit price($/kWh), total cost($) of your appliances. By switching 8 display modes, you can easily know the various parameters while the appliance is working. The “electricity” mode can calculate and display how much power your appliance uses. And the “total cost” mode will show how much electricity bill it cost in cumulative time
- Overload protection: When the loading power of the appliance is over the default overload threshold 1800W, the whole display with backlight and the word “OVERLOAD” will keep flashing to warn the users. Please turn off the appliance for safety concern
- Premium Material: The whole body of our energy meter is made of high-quality ABS material. It makes our home electricity usage monitor more long lasting, fireproof and anti-drop. The standard US socket and plug is suitable for all US standard appliances
- Backlight Display: With white backlight and black words, the LCD display of our home power monitor can display the data clearer and help you to read the data easier no matter day or night. The backlight will only lights up when the device is connected to AC power. If no button is pressed, the backlight turns off automatically after 10 minutes. You can also press the "UP" button to turn off the backlight manually, and press any button to turn on backlight again
- Easy to reset: No reset tool needed, our appliance power usage meter is easy to reset. You can press the “M” button for 5 seconds directly to reset the device. After reset, all cumulative data (electricity quantity, cost) will be cleared, and all settings will be restored to factory settings
When did the electric increase take effect?
The first-year electric tariff changes took effect February 1, 2026. Separately, a delivery-revenue surcharge is scheduled to run from February 1 through December 31, 2026, to recover revenue differences associated with extending the rate-case suspension period by one month. Check the electric case documents and current Con Edison tariff material for implementation details.
How did the approved plan compare with Con Edison’s request?
The initial electric request was substantially larger than the approved plan. The filing summary described a proposed first-rate-year increase of about $1.612 billion in annual electric revenues—18.0% in base delivery revenues or 11.4% in total revenues. For a 600-kWh-per-month residential example, the initial filing listed a requested monthly increase of $26.60 and a 13.4% total-bill increase. These were proposal figures, not the rates ultimately approved.
Rank #3
- SAFETY YOU CAN TRUST WITH UL CERTIFICATION: With Emporia Energy, your home energy monitoring is safe, reliable, and certified. The Emporia Vue is UL Listed, meaning it has met rigorous safety standards for electrical products in the U.S. and Canada. This certification ensures that every component has been thoroughly tested to prevent hazards, such as overheating, short-circuiting, or fire, offering you peace of mind as you manage your home’s energy consumption.
- INSTALLS IN CIRCUIT PANEL of most homes with clamp-on sensors. Supports Single phase, Single-split phase, and 2-wire systems. 3-wire systems; 3-phase, 4-wire Wye systems with earthed (TN or TT) neutral (no-Delta) are supported with an additional 200A sensor (sold separately).
- 24/7 ENERGY MANAGEMENT AND MONITORING: Automate, manage and control your home's real power anywhere, anytime to prevent costly repairs, conserve energy, and save costs. Monitor solar / net metering. PROTECTED BY A 1-YEAR WARRANTY.
- LOWER YOUR ELECTRIC BILL: Configure settings in the Emporia Energy App to automate energy management for time of use, peak demand, excess solar, and rewards programs. You can even see live reporting and invaluable savings opportunities instantly. Gauge real-time spending and get actionable notifications and automated energy management to help you reduce costs.
- REAL-TIME ENERGY DATA: REQUIRES 2.4 GHz WIFI WITH AN INTERNET CONNECTION to monitor energy use with iPhone / Android / Web app. Vue sensors collect energy data and are accurate from ±2%. The Vue is UL and CE Listed for your safety. 1 second data is only available in the app (when actively open) and retained 3 hours. Minute and hour data are retained in the cloud. 1 minute data is retained 7 days, 1 hour data is retained indefinitely. Export cloud data whenever you want in the app.
DPS said the PSC decision reduced the first-year electric delivery-revenue request by more than $1.37 billion, or 87%, compared with Con Edison’s initial request. That is a case-level comparison, not an 87% reduction in customer bills. DPS also described $156.5 million in total efficiency savings in the adopted joint proposal. Read the agency’s January 22, 2026 approval release for the decision context.
What customer protections and programs are included?
DPS says the plans include performance measures for safety and customer service, earnings-sharing mechanisms, greenhouse-gas reporting, weather-related customer protections, and customer-service enhancements to the low-income affordability program. The electric plan also includes measures intended to expand demand response and speed energization for some electrification projects.
Rank #4
- Various Monitoring Parameters: The power meter plug can monitor the power (W), energy (kWh), volts, amps, hertz, power factor, cost, minimum and maximum power (W), cumulative days and time of your appliances. By switching 7 display modes, you can easily know the various parameters while the appliance is working. The home energy monitor can also calculate and display how much power your appliance uses and how much electricity bill it cost in cumulative time
- Upgraded LCD display: With large screen size 2.36 inch x 1.85 inch, clearer monitor backlit, our electrical usage monitor can display the data clearer and more visible no matter day or night. 180°full wide viewing angles is great for reading and recording the data in any angles. No need to stand on the front of the display and bend over to read the numbers
- Adjustable Backlight Time: Our upgraded watt meter has 5 options of backlight time. The default backlight time duration is 10 minutes(bL-0). If you want to change the backlight time, you can press and hold "UP" and "DOWN" button at the same time to enter backlight time setting, then press "UP" and "DOWN" to select the backlight time (bL-0 =10 minutes, bL-1=1 hour, bL-2=4 hours, bL-3=8 hours, bL-4=always on), finally press the "COST" to save the backlight time settings
- Overload protection: When the power of the appliance exceeds the overload power, the LCD will display “OVERLOAD” to warn the user. All the buttons will quit working and can only be workable when you lower or remove the load power. The default overload power is 3680W and is adjustable from 0 to 3680W. In general, you need to set the overload power to 1800W before using. Just press the "function" button for more than 3 seconds to enter the setting
- Data Memory Function: The wattage meter will record your power consumption data when you remove it from socket, or remove appliances from the electricity monitor. You can directly see the last data when you use it next time. This function can also automatically save the data when there is a sudden power failure
The PSC’s release describes improved outreach for the Energy Affordability Program and Con Edison’s energy-exchange program, which it says can help customers avoid gas service-line replacement by fully electrifying their homes. Program availability and eligibility depend on current rules; check directly with Con Edison or DPS rather than assuming a particular customer qualifies. See the PSC release for the described provisions.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.How to understand your own bill
- Identify your service and class. Determine whether the charge is for electric or gas service and check the customer class shown on your bill.
- Compare usage with the right example. Match electric usage in kWh or gas usage in therms to the examples in the relevant DPS summary table; do not compare different usage levels as though they were equivalent.
- Separate delivery and supply. The rate case concerns regulated delivery charges as well as revenue requirements. Supply charges are distinct, and switching suppliers is not established here as a way to erase an approved delivery-rate change.
- Check current tariff and adjustments. Review current Con Edison tariff material and bill line items for applicable surcharges or other adjustments. The first-year electric changes and temporary surcharge have distinct timing.
- Ask about assistance if affordability is a concern. Contact Con Edison or DPS about current Energy Affordability Program eligibility and application requirements.
The public-hearing dates and comment period for this case are historical: the PSC has already approved the plans. Current implementation information is available through Con Edison tariff material and the DPS gas case documents.
Recommended Free Tools
Quick Recap
Best Value
- ✓ Backlit LCD Display: The watt meter features an upgraded backlit LCD display with a 160° wide viewing angle, providing clear and distinct data readings from any angle, day or night. (Note: To conserve energy, the backlight will automatically turn off after 15 seconds of continuous use.)
- ✓ 9 Types of Data Display: This energy meter plug accurately monitors a wide range of electrical parameters, including power (W), apparent power (VA), energy consumption (kWh), usage time (hours), power frequency (Hz), power factor (PF), voltage (V), current (A), and electricity cost. The user-friendly interface allows you to easily read and navigate through 9 types of data with a single button.
- ✓ Save Money and Energy: By toggling through the 9 display modes, you can gain insights into various operational parameters of your devices. The home energy monitor also calculates and displays the electricity consumption and cost over time, helping you save on your electricity bills by monitoring and managing energy usage.
- ✓ Data Storage: The plug-in electricity meter stores all non-real-time data, ensuring no information is lost in the event of a sudden power outage. If data exceeds the screen’s maximum display range, the screen will flash as a reminder. Pressing and holding the reset button for 3 seconds will reset the cumulative data to zero.
- ✓ Safe to Use: Rated voltage 125VAC, 60Hz, 15A maximum 1875W resistor and tungsten wire, 1/2HP. Clean and tidy interface, very simple to use.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
