What’s actually slowing this PC down?
Pick the symptom - the matching free tool is one click away.
Plastic Logic strengthened its senior management team with two appointments: Simon Jones became Vice President of Business Development, and Bridget Kerle became Chief Financial Officer and General Counsel. Jones brought experience in technology business development and licensing; Kerle had most recently served as CFO of Commtag.
Who joined Plastic Logic’s management team?
The indexed EE Times item, titled “Plastic Logic amends management team,” names Simon Jones and Bridget Kerle. Jones took the business-development role, while Kerle combined the finance and legal leadership roles of CFO and General Counsel. The accessible record does not reliably establish when the announcement was originally published.
What experience did Simon Jones bring?
Before joining Plastic Logic, Jones was General Manager of the Bluetooth Business Group at Tality. Earlier, he worked at Cambridge design company Symbionics and later held roles after Symbionics was acquired by Cadence Design Systems. His experience included design services and intellectual-property licensing.
Who was Bridget Kerle?
Kerle had most recently been CFO at Commtag, which the indexed announcement describes as a wireless-data software company. Plastic Logic appointed her both Chief Financial Officer and General Counsel.
Do these 3 things before closing this tab:
1Repair Windows errors before they cause bigger problems2Fix the driver behind crashes, sound loss and screen glitches3Clear out junk files and repair common Windows errors#1 Best Overall
- Provide online user manual (examples for Raspberry Pi/Jetson Nano/Arduino/STM32), please check the manual carefully before using!
- This is an E-Ink display module, 1.54inch, 200x200 resolution, with embedded controller, communicating via SPI interface, supports partial refresh.
- Due to the advantages like ultra low power consumption, wide viewing angle, clear display without electricity, it is an ideal choice for applications such as shelf label, industrial instrument, and so on.
- No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing
- SPI interface, for connecting with controller boards like Raspberry Pi/Arduino/Nucleo, etc. Onboard voltage translator, compatible with 3.3V/5V MCUs
How did the appointments fit Plastic Logic’s business?
Plastic Logic was a Cambridge, England spin-out founded in 2000 to develop plastic-electronics technology and printed active electronic circuits for flexible, large-area applications, according to EDN. Jones’s background in technology business development and IP licensing was relevant to commercial growth, while Kerle’s combined finance and legal remit covered financial and governance responsibilities.
What is known about the announcement date?
The indexed EE Times record preserves the headline and appointment details but does not reliably expose the original publication date. A separate EE Times report says Indro Mukerjee became CEO in 2011, succeeding Richard Archuleta; that later leadership change does not establish when this announcement appeared.
Quick Recap
Best Value
- This is 2.13inch E-Ink display HAT with Raspberry Pi 40PIN GPIO extension header, compatible with Raspberry Pi series boards, Jetson Nano. 250x122 resolution, Black and White Two Display colors, with embedded controller, communicating via SPI interface, supports partial refresh.
- No backlight, keeps displaying last content for a long time even when power down. Ultra low power consumption, basically power is only required for refreshing.
- SPI interface, for connecting with controller boards likeArduino/STM32, etc. Onboard voltage translator, compatible with 3.3V / 5V MCUs.
- Version Notice: The driver board is Rev2.1 (Version 2.1), which is independent of the screen version. Currently, there is only Rev2.1 (Version 2.1) for the driver board and QC label V4 is for the screen version, QC label V4 is currently being shipped.
- Comes with online development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/Arduino/STM32): bit.ly/3hZh77i
Rank #4
- SPI interface, Compatible with Raspberry Pi/Arduino/Nucleo, etc.
- Ultra low power consumption, basically power is only required for refreshing
- Onboard voltage translator, compatible with 3.3V/5V MCUs
- Comes with development resources and manual (examples Compatible with Raspberry Pi/Arduino/STM32)
- No backlight, keeps displaying last content for a long time even when power down
Rank #3
- ✅ This is a e-Paper display, with driver board. Compatible with Raspberry Pi and Jetson Nano
- ✅ Adopts E_Ink Spectra 6(E6) technology, supports 6-Color display. No backlight, keeps displaying last content for a long time even when power down
- ✅Ultra low power consumption, basically power is only required for refreshing. Onboard voltage translator, compatible with 3.3V / 5V MCUs
- ✅With standard Raspberry Pi 40PIN GPIO extension header, supports Raspberry Pi series boards/Jetson Nano.Adapting SPI interface for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
- ❤️Rich WiKi Resources❤️ We provide official Wiki resources, please contact us for more information.
Rank #2
- Enjoy a paper-like viewing experience with the 2.13-inch e-paper display. The screen can retain the last displayed image even after power is removed, making it ideal for applications requiring long-term information display without continuous power supply.
- Designed for low-power projects, this e-ink module only consumes energy during screen updates and remains in standby mode most of the time. Perfect for battery-powered devices, smart labels, IoT projects, and long-running applications.
- Featuring a 250x122 pixel black-and-white display, this e-paper HAT delivers clear text and image rendering. Partial refresh support helps reduce update time and power consumption for smoother display operation.
- Equipped with a standard Raspberry Pi 40-pin GPIO header and SPI communication interface, this display module works with Raspberry Pi series boards, Arduino, ESP32 and other compatible development platforms. Built-in voltage conversion supports both 3.3V and 5V MCUs.
- Comes with connection accessories and supports online resources including driver board diagrams and example programs for Raspberry Pi, Arduino, and ESP32, helping developers quickly start their projects.
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.
