Hardware FixRecommendedDevice not working? Your driver may be the problemCheck updates for common hardware issues.Fix DriversBlack Friday PreviewAmazon USBlack Friday preview: compare before the rush hitsAmazon US: current deals, useful picks and tech finds.Check DealsPC HealthRecommendedCrashes, freezes, slowdowns? Check your PC nowSpot repairable issues before they interrupt work.Check PC×
Skip to the guide
THE FINANCEBASE List yours

Guide

Closing Auction Orders Explained: How to Choose Between MOC and LOC

By TheFinanceBase Team 14 min read

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Some links on this page are affiliate links: if you buy through them we may earn a commission, at no extra cost to you.

Market-on-close (MOC) and limit-on-close (LOC) orders both target a stock’s closing auction, but they solve different problems. MOC prioritizes taking part in the auction without a customer-entered price limit; LOC sets a worst acceptable price and may remain partly or wholly unfilled. Use MOC only when accepting the eventual auction price matters more than a price boundary. Use LOC when a specified maximum buy price or minimum sell price matters more than completing the trade.

The mechanics, deadlines and late-order rules are exchange-specific. The explanation below focuses on NYSE and Nasdaq rules documented in the supplied sources; your broker can impose an earlier submission deadline or handle the order differently. Confirm the listing venue, ticket details and cutoff shown by the broker before sending an order.

As an Amazon Associate I earn from qualifying purchases.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

At a glance

Name Best for Key spec Checked
Market-on-close (MOC) Investors who want closing-auction participation and can accept the clearing price No customer-entered limit price; executes only in the closing auction if eligible November 2026
Limit-on-close (LOC) Investors who need a maximum buy price or minimum sell price Executes at the auction price only when that price is equal to or better than the limit; fill is not guaranteed November 2026

Details checked November 2026.

What is the difference between MOC and LOC orders?

MOC and LOC are closing-auction instructions rather than ordinary continuous-market orders. An MOC carries no customer-entered price. An LOC carries a limit that determines whether the auction price is acceptable.

Nasdaq defines an MOC as an order entered without a price that may be executed only during the Nasdaq Closing Cross; selected orders receive the cross price. The NYSE describes its MOC similarly as a market order traded only in the closing auction. A market order does not mean an order that executes at any price at any time: the “on close” condition restricts it to the closing event.

Popular on Amazon
Sale
The Psychology of Money: Timeless lessons on wealth, greed, and happiness
  • Ideal for Gifting
  • Ideal for a bookworm
  • Compact for travelling

Nasdaq defines an LOC as eligible for the Closing Cross only if the cross price is equal to or better than the entered limit. The U.S. Securities and Exchange Commission’s Special Study: Display of Customer Limit Orders summarizes the general concept: “A limit order is an order to buy or sell a security at or better than a specified price.” In a closing auction, the limit is a price boundary, not a promise that enough opposite-side shares will be available.

Decision axis MOC LOC
Price instruction No customer-entered price limit Sets a limit; the cross price must be at or better than the limit for eligibility
Main priority Participate in the close without specifying a price boundary Enforce a maximum buy price or minimum sell price
Main trade-off You accept the auction’s clearing price rather than setting a boundary Price protection can produce a partial fill or no fill
Execution venue Only the designated closing auction, subject to venue rules Only the designated closing auction, subject to venue rules

Which should you use: MOC or LOC?

Choose MOC when missing the closing auction would be worse for your objective than accepting an uncertain auction price. Choose LOC when trading beyond a defined price would be unacceptable, even if that means receiving fewer shares or no shares.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Ask these questions before entering either order:

  1. What is the non-negotiable constraint? For a buy, is there a highest acceptable price? For a sell, is there a lowest acceptable price?
  2. Is a missed close acceptable? LOC can fail its price condition or lack enough contra-side quantity. MOC can also be unfilled or partially filled when eligible interest and exchange priority rules do not provide enough shares; neither order type is an automatic execution guarantee.
  3. Why does the close matter? A fund benchmark, index rebalance, valuation process or end-of-day accounting task may require a closing-auction price. If your reason is simply convenience, a regular limit order or another order type may fit better.
  4. How large is the order relative to likely auction liquidity? A large order can consume available interest, receive only a partial execution or affect the auction outcome. The existence of a published imbalance does not mean your entire size will fill.
  5. Which exchange and broker rules apply? NYSE and Nasdaq use different cutoffs and late-order provisions, and a broker may stop accepting the instruction earlier.

A concise rule is: price boundary first means LOC; participation first means MOC. That is a decision framework, not an investment recommendation or an assurance of execution.

How does an MOC order work?

You submit the quantity with a market-on-close designation. The order is held for the venue’s closing process rather than matched immediately in the continuous book. If it is eligible and selected under the venue’s rules, it executes at the closing-cross price.

Because you do not provide a limit, you cannot tell the exchange “do not buy above” or “do not sell below” a particular number. The final price is determined by the auction’s eligible interest and matching rules. An MOC is therefore useful when the official close itself is the objective, but risky when a price threshold is essential.

“Market” does not remove auction mechanics. The exchange can apply entry, cancellation, priority and imbalance rules; available contra-side interest can still be insufficient. Nasdaq’s rulebook describes priority when the Closing Cross cannot execute every eligible order. MOC receives priority in the stated sequence before certain displayed and non-displayed interest, but that priority does not turn every MOC into a guaranteed full fill.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Typical MOC use cases

  • A portfolio process requires buying or selling at the official close rather than at an intraday quote.
  • An investor wants the closing print and regards a small price difference as less important than participating.
  • A strategy has a documented end-of-day rule and accepts that the auction price cannot be known in advance.

These are process examples, not claims that an MOC is suitable for every account or security.

How does an LOC order work?

You submit a quantity, a buy or sell side and a limit price with a limit-on-close designation. The order can participate only if the closing-cross price satisfies the limit. A buy LOC generally requires the cross price to be at or below the limit; a sell LOC generally requires it to be at or above the limit. The exchange’s precise eligibility and allocation rules control the result.

Also popular on Amazon

Suppose you enter a buy LOC with a $50 limit. A $49.80 cross satisfies the price condition; a $50.20 cross does not. Even at $49.80, you might receive only part of the requested quantity if eligible sell interest is insufficient or other orders have priority. The limit protects the price condition, not the quantity.

For a sell LOC with a $50 limit, a $50.30 cross meets the price condition, while a $49.80 cross does not. If the price condition fails, the order does not simply convert into an MOC or a regular limit order unless your broker and venue explicitly say so.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Typical LOC use cases

  • You have a maximum price for a purchase or a minimum price for a sale that you will not cross.
  • You can tolerate a partial or missed execution to avoid trading outside that boundary.
  • You want closing-auction participation but need a documented price control for a mandate or risk limit.

What are the NYSE closing-auction cutoffs?

NYSE timing is venue-specific. The NYSE Opening and Closing Auctions Fact Sheet states that ordinary MOC and LOC orders may be entered, modified or canceled until 3:50 p.m. Eastern Time. After 3:50 p.m., entry is limited to orders on the contra-side of a significant MOC/LOC imbalance until the stock closes; existing MOC and LOC orders cannot be modified or canceled under the fact-sheet rule.

The NYSE’s auctions page describes a closing freeze at 3:59 p.m. and a 4:00 p.m. close for the regular session. The fact sheet also describes auction information published through the closing window, including paired quantity, unpaired quantity, total imbalance quantity, closing-only interest price and continuous-book clearing price.

These times describe NYSE procedures, not a universal U.S. rule. They can also be affected by market holidays, early closes, security-specific conditions or later rule changes. Your broker may require an earlier time so it can review and route the order. Treat the broker’s displayed deadline and the current NYSE rule as separate checks.

What are the Nasdaq MOC and LOC cutoffs?

Nasdaq’s Equity 4 rulebook contains separate, detailed provisions for MOC and LOC orders. An MOC may generally be entered until immediately before 3:55 p.m. Eastern Time. It may normally be modified or canceled until immediately before 3:50 p.m.; after that, a modification or cancellation is restricted to a legitimate-error request before 3:58 p.m., after which the cited rule bars it.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Nasdaq LOC orders normally may be entered, modified or canceled until immediately before 3:50 p.m. The rule also describes later entry and error-correction windows. Because the wording and exceptions are technical, read the current rule for the security and order circumstance rather than relying on a simplified “3:50” or “3:55” slogan.

Nasdaq executes orders selected for the Closing Cross at the cross price. Its priority provisions determine how eligible interest is handled when the cross cannot execute all of it. The fact that an order is submitted before a cutoff does not establish that it will receive a full execution.

How should you read closing-auction imbalance data?

Imbalance data can show the auction’s current paired quantity, the direction and size of unpaired interest and an indicative price. It is useful context, but it is not a final price, a forecast guarantee or proof that your order will fill.

NYSE publishes paired and unpaired quantities and other auction fields during the closing period. Nasdaq’s Order Imbalance Indicator reports information about eligible MOC, LOC and other close-eligible interest, including paired quantity, imbalance size and direction and indicative prices. New orders, cancellations, modifications and changing prices can alter these figures before the cross.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Use an indication to understand conditions, not to override a pre-set risk limit. For example, a rising buy imbalance might make an MOC buyer expect upward pressure, but it does not establish the final cross or guarantee that a sell LOC at a particular price will be eligible. Conversely, a favorable indicative price does not ensure enough shares for your full size.

A practical way to use the data

  1. Confirm which venue’s data you are viewing and whether the security is eligible for that auction.
  2. Check paired quantity against your requested size; do not assume displayed quantity is reserved for your order.
  3. Note the imbalance direction and indicative price, but treat both as changing information.
  4. Reconfirm your MOC-versus-LOC decision against your original price and participation priority.
  5. Do not cancel or revise after a venue cutoff unless the rule and broker explicitly allow it; a late change may be rejected or create an unintended position.

Does an LOC improve the chance of getting a good closing price?

An LOC can prevent an execution outside your chosen boundary, but no general probability is established here that it will produce a better price than an MOC. Its immediate effect is eligibility control: the cross must satisfy the limit, and the order still needs sufficient opposite-side interest and a favorable allocation.

NYSE published one narrowly scoped historical analysis in “Closing Auction: Timing Shifts and Marketability Trends.” For NYSE-listed S&P 500 securities from September 2024 through August 2025, NYSE reported that a buy-side limit set at 99.8% of the reference price at 3:00 p.m. had a 79% probability, in its analysis, of the closing-auction price meeting or exceeding that level. The result depends on the stated securities, period, side, time and threshold. It is not a forecast for a different stock, venue, date or limit, and it is not a guarantee that an individual order will fill.

Do not convert that statistic into a universal LOC success rate. Historical marketability can change with volatility, index events, liquidity, auction participation and rule changes.

Free tools Windows power users keep installed

One-click scans. No signup required.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

How large are closing auctions?

NYSE’s 2026 article, “The busiest room on Wall Street,” characterizes its closing auction as matching approximately $44 billion daily and more than $230 billion on major rebalance days. Those are NYSE figures describing that venue’s scale, not a comparison of MOC and LOC execution quality and not a promise that a particular security has enough liquidity for your order.

Large aggregate volume can coexist with thin liquidity in an individual security. Consider average daily volume, the security’s usual auction participation, your percentage of expected volume and the consequences of a partial fill. If a missed residual would create a larger risk than the price uncertainty, revisit the order size and execution plan rather than assuming the auction will absorb it.

What can go wrong with MOC and LOC orders?

Assuming MOC guarantees a fill

MOC means no customer-entered limit price, not guaranteed execution. Eligible contra-side interest, order priority, venue conditions and the order’s status at the cutoff all matter. A partial or no fill can leave you with an unintended exposure after the close.

Assuming LOC guarantees the limit price or full quantity

An LOC can execute only when the cross satisfies its price condition. Meeting the condition does not guarantee enough shares or priority for the requested size. The order may be partly filled or not filled at all.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

Using the wrong venue’s cutoff

A 3:50 p.m. NYSE deadline cannot be applied automatically to Nasdaq, and Nasdaq’s 3:55 p.m. MOC entry provision does not make that time universal. Identify the listing venue and check the current rule and broker deadline.

Trying to cancel after the freeze

Late cancellation and modification rules are restrictive. On NYSE, the fact sheet says existing MOC/LOC orders cannot be modified or canceled after the ordinary 3:50 p.m. cutoff, subject to the venue’s stated late-order framework. Nasdaq permits only specified late error procedures. Submit early enough to leave time for a broker rejection or correction.

Treating indicative data as a promise

Imbalance size and indicative price can change as participants enter, cancel or revise orders. They describe the current calculation, not the final cross.

Expecting an automatic conversion

An unfilled LOC does not automatically become an ordinary limit order or MOC unless the broker’s order ticket and venue rules expressly provide that behavior. Read the order preview for duration, venue and residual handling.

What’s actually slowing this PC down?

Pick the symptom - the matching free tool is one click away.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.
Independent reader supportYour contribution helps us test, update, and keep practical guides available for everyone.Support on Ko-Fi

How do you enter a closing-auction order safely?

Before opening the ticket, have the ticker, side, share quantity, account authority, price boundary (if any), listing exchange and the time by which the order must reach the venue. Also know what you will do if the order is partial or unfilled.

  1. Identify the listing venue. Confirm whether the security is listed on NYSE, Nasdaq or another venue. Do not infer the auction rule from the broker’s generic label alone.
  2. Choose the instruction. Select MOC if accepting the auction price is the priority. Select LOC if your maximum buy or minimum sell price is the priority.
  3. Set quantity and, for LOC, the limit. Check the side carefully: a buy limit is a ceiling; a sell limit is a floor. Verify that the displayed limit is not a stop price or a regular-session limit.
  4. Read the ticket’s timing and routing language. Confirm the order is for the close, whether it is accepted only until a stated cutoff, and whether the broker imposes an earlier deadline.
  5. Review estimated outcomes. If imbalance information is available, use it as changing context. Do not treat an indicative price, paired quantity or displayed dollar value as a guaranteed result.
  6. Submit before the operational deadline. Leave time for authentication, a rejection, correction or routing delay. The exchange cutoff is not necessarily the broker’s customer cutoff.
  7. Save the confirmation. Record the order type, quantity, limit (if any), timestamp, venue and order status.
  8. After the close, verify execution and residuals. Check the fill quantity and price in the official confirmation. A residual may remain unfilled, and its later handling depends on the broker and order instructions.

Can you use MOC or LOC for every stock?

No. Eligibility, trading status, corporate actions, halts, special closes and venue rules can restrict closing-auction orders. A broker may hide the order type for securities or accounts that do not support it, or may route only to a particular venue.

Also popular on Amazon
Sale
I Will Teach You to Be Rich: No Guilt. No Excuses. Just a 6-Week Program That Works (Second Edition)
  • It can be a gift option
  • Comes with secure packaging
  • Helpful in various ways

Check the security’s listing venue and the broker’s current order documentation. If the ticket does not clearly identify “market-on-close” or “limit-on-close,” ask the broker whether its label represents a true closing-auction instruction, a routed equivalent or a different order type. Do not assume that a generic “close” time-in-force has identical behavior.

What should you document for an investment or trading policy?

A written policy should state the purpose of using the close, permitted order type, maximum order size, price boundary rules, cutoff, approval authority and treatment of partial fills. It should also identify who verifies the listing venue and who reviews execution reports.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

For an LOC policy, specify how the limit is chosen and what happens if the price condition is not met. For an MOC policy, specify how the organization accepts price uncertainty and monitors the size relative to auction liquidity. Include a rule that published imbalance data is informational only and cannot override a risk limit without documented approval.

Bottom line: when is each order appropriate?

MOC is the clearer expression of “participate in the closing auction even though I am not entering a price limit.” LOC is the clearer expression of “participate only if the closing price meets this maximum-buy or minimum-sell boundary.” Neither guarantees a full fill, and neither should be entered without checking the listing exchange, broker deadline, order status and residual handling.

If you cannot accept a price beyond a defined level, do not use MOC merely to improve the chance of participation. If completing the close is more important than enforcing a price boundary, an LOC that is too restrictive can leave the intended exposure unresolved. Match the order type to the consequence you are least willing to accept, then verify the venue’s current rules before submitting.

Frequently Asked Questions

Can a closing-auction order be placed after the regular trading session ends?

Usually not in the ordinary sense. NYSE and Nasdaq impose specific pre-close deadlines and tightly limited late-entry or error-correction exceptions; an order submitted after the broker’s cutoff may be rejected even if the exchange has a narrow exception. Check the venue rule and your broker’s timestamp requirement for that session.

Special offer. See more information about Outbyte and uninstall instructions. Please review EULA and Privacy policy.

What happens if my LOC order is only partly filled?

The executed shares receive the closing-cross price, while the unexecuted balance follows the broker and venue’s stated residual handling. It does not automatically become an MOC or a next-day order unless the ticket explicitly says so, so review the confirmation and duration settings.

Is a closing-auction price the same as the last traded price?

Not necessarily. The closing auction calculates a cross from eligible auction and other close-related interest, while the last continuous-market trade occurred earlier and may reflect different liquidity. The official close is the auction result when the venue conducts and publishes one.

Can an imbalance indicator tell me which way the stock will move after the close?

No. It reports the current state of eligible interest and an indicative calculation, both of which can change before the cross. It is not a directional forecast for the next session and cannot establish that an individual order will execute.

Quick Recap

SaleBestseller No. 1
The Psychology of Money: Timeless lessons on wealth, greed, and happiness
The Psychology of Money: Timeless lessons on wealth, greed, and happiness
Ideal for Gifting; Ideal for a bookworm; Compact for travelling
$10.99
SaleBestseller No. 2
SaleBestseller No. 5
I Will Teach You to Be Rich: No Guilt. No Excuses. Just a 6-Week Program That Works (Second Edition)
I Will Teach You to Be Rich: No Guilt. No Excuses. Just a 6-Week Program That Works (Second Edition)
It can be a gift option; Comes with secure packaging; Helpful in various ways
$8.48
Product prices and availability are accurate as of the date/time indicated and are subject to change. Any price and availability information displayed on Amazon at the time of purchase will apply. Prices as of November 16, 2026 11:16 pm GMT+0530.

More guides

Recommended PC Tool
Recommended PC Tool
Crashes, No Sound, or Screen Glitches?Free driver scan
Windows Errors? Fix Them Before They SpreadFree repair scan

Two free Windows tools

One Free Minute Could Fix That PC

Before you go - each of these free tools takes about a minute and tackles what quietly slows a Windows PC down.

Special offer. View Outbyte info, uninstall instructions, EULA, and Privacy Policy.